Posted by Bob Read on May 31, 1998 at 18:16:42 in pm3-1-073.apci.net:
In Reply to: Funnel pipes posted by Loren Perry on May 31, 1998 at 00:27:59:
: While installing my model's funnel pipes, I noticed
: that the Minicraft kit seems to provide too many cooling
: pipe assemblies. If I'm interpreting the photos of the
: real ship correctly as well as Ken Marschall's
: paintings, the funnel pipes should be as follows:
: No. 1 funnel: Two pipe assemblies on the right side,
: none on the left.
: No. 2 funnel: No pipes at all.
: No. 3 funnel: Two large multi-pipe assemblies on the
: left rear and right rear. None on the front.
: No. 4 funnel: One pipe on the right rear.
: All pipes in the kit labeled C10 are therefore omitted.
: A simple fix.
: Anyone out there differ? Please advise.
Hold on to your hat Loren, I have found a fourth pipe on the first funnel. Read my separate post for details.
Bob Read