Posted by Doug May on September 28, 1999 at 02:10:43 in 199.50.26.8 :
In Reply to: Drill Bit for Small Portholes posted by Charles R on September 27, 1999 at 16:07:45:
My Local Ace Hardware Store sells X Acto knives, blades and included in the section of tools made by X-Acto are a set of about 15 to 20 micro-sized drill bits for use in a pin vise or Dremel-type tool. If you can't find these micro bits anywhere else, post another message here and I will email you their address and phone number.
Also, X-Acto may have a web site and you might contact them as well for a locat distributor. I have even seen companies on the web that sell micro tools and supplies.
Use the web to your advantage, go to Yahoo, and in the search window type "micro bits" or "drill bits" or whatever you are looking for. Chances are you will find it if you look for it.