Posted by Richard Tonti on April 26, 1998 at 11:37:41 in 204.middletown-03.va.dial-access.att.net:
In Reply to: Re: HELP! I messed up my model! posted by Frank Giacobbe on April 26, 1998 at 10:35:39:
: Here's what I did to fix the 6 portholes that I messed up. I took model puddy, and from the inside of the hull, pushed the puddy through each individual hole until it was slightly raised on the outside. I let that dry completely, and this morning, I just sanded the puddy flush, and painted it to match the hull black. Now I just have to wait for it to dry and then worry about putting the actual portholes BACK onto the ship. :) But all and all...it wasn't nearly as bad as I thought it was. Thanks for the advice gang! Also....do they MAKE brass tubing small enough to do what a few of you suggested?
: Frank
***Frank,
I believe the correct tube dia. is 1/16". Many years ago I purchased an entire K&S merchandiser from a dufunked local hobby shop. E-mail me a shipping address and I'd be happy to send you some.
Very glad that you were able to rectify the problem. STAY with it.
Best Regards,
Richard Tonti